Home
Instructions
-
About Wood
1. Proper Storage
When not worn, clean with an odorless dry cloth. Store in scent-proof sealed bags or glass containers placed in cool, shaded areas. Avoid compression to prevent damage.2. No Hand-Rubbing Polishing
Rubbing beads creates surface patina that clogs pores, trapping internal oils. This diminishes fragrance. Skin oils and sweat absorbed during handling will alter the natural scent profile.3. Avoid Water Exposure
Brief contact with clean water is tolerable. Prolonged or frequent exposure compromises fragrance integrity. Absolute prohibition: Never expose to hot water.4. Prevent Sun Exposure
Direct sunlight accelerates fragrance dissipation and may cause complete aroma loss. UV radiation also induces cracking through rapid dehydration.5. Shield from Oils/Chemicals
Wood readily absorbs external odors (perfumes, lotions) and chemical residues. Once contaminated, original fragrance is irrecoverable. Remove before:
• Applying skincare products
• Using perfumes/colognes
• Handling cleaning agents
-
Bodhi Seeds
1. Storage Protocol
Bodhi seeds crack when wind-dried. Store in sealed bags or glass jars when not worn to maintain humidity balance.2. Absolute Water Prohibition
As plant seeds, bodhi expands upon water contact causing:
✓ Irreversible cracking
✓ Delamination (surface peeling)
✓ Structural degradation3. Sunlight Avoidance
UV exposure triggers:
✗ Thermal shock fractures
✓ Accelerated dehydration cracks
✗ Surface exfoliation
Maintain stable temperatures below 86°F (30°C).4. Scientific Cleaning
For routine maintenance:
① Wipe with barely-damp microfiber cloth
② Air-dry immediately
For stubborn residue:
① Use soft-bristle brush (e.g. horsehair)
② Apply trace olive oil (<0.5ml per 10 beads)
③ Buff gently along grain patterns
❗ Oil excess causes permanent blotching5. Natural Conditioning
Human skin oils optimally nourish bodhi seeds:
✓ Palm secretions enhance luster
✓ Daily handling builds protective patina
✓ Maintains seed vitality without artificial treatments
-
Yak Bone
1. Stabilize Temperature & Humidity
Yak bone is hygroscopic and thermally sensitive. Maintain within:
✓ Temperature: 15-25°C (59-77°F)
✓ Relative Humidity: 45-55% RH
✗ Avoid rapid fluctuations exceeding ±5°C/±10% RH per 24h to prevent:
• Structural cracking
• Delamination
• Warping deformation2. Delicate Cleaning Protocol
Materials:
• Microfiber cloth (ISO Class 5 cleanroom grade)
• Distilled water (pH 7.0)
Procedure:
① Dry-wipe surface along osteon grain direction
② For stubborn residues: Dampen cloth edge minimally
③ Immediate blot-drying required
‼️ Prohibited:
• Chemical cleaners (even pH-neutral)
• Abrasives
• Liquid immersion3. Museum-Grade Storage
① Wrap in oxygen-free archival tissue (pH 8.5-10.5)
② Place in rigid conservation box (buffered acid-free board)
③ Maintain with silica gel (35-40% RH) + oxygen scavenger
④ Isolate from hard objects using ethafoam® spacers
-
Crystal
1. Energetic Cleansing & Recharging
Crystals expend protective energy and absorb negativity over time. Purify monthly by:
✓ Placing on natural cleansing stones (selenite/quartz cluster)
✓ Minimum 2-hour immersion in crystalline resonance field
✓ Moonlight charging during full moon cycles2. UV Exposure Prohibition
Subterranean formation makes crystals photosensitive:
✗ Direct sunlight fades chromophores (pink/purple/yellow crystals)
✗ Thermal shock risk above 40°C (104°F)
✓ Indirect daylight ≤30 minutes acceptable3. Hydro-Nourishment Cycle
Silica-based structures require hydration:
① Submerge in spring/distilled water 20 minutes weekly
② Pat dry immediately with microfiber cloth
‼️ Check string integrity monthly (water accelerates fiber degradation)4. Chemical Contamination Prevention
Avoid exposure to:
✗ Alkaline soaps (pH >8 dissolves surface matrix)
✗ Surfactants (sodium lauryl sulfate etches surfaces)
✓ Remove before bathing/cleaning5. Energetic Imprint Management
Crystals develop personalized resonance:
✓ Limit others' wear to ≤15 minutes
✓ Post-contact cleansing mandatory for:
• Emotional transfers
• Extended physical contact
✗ Permanent energetic contamination occurs after 2+ hours6. Isolation Storage
Despite Mohs 7 hardness:
✓ Store individually in silk-lined compartments
✗ Prevent contact with diamonds/corundum (Mohs 8+)
✓ Cushion drill holes against impact fragmentation
-
Dzi Bead
1. Restricted Handling
As consecrated relics, Dzi beads absorb energies:
✓ Only owners & family may touch
✗ If handled by others, purify with dhang smoke before re-wearing2. Continuous Devotional Wear
Dzi's magnetic field harmonizes with wearer:
✓ Wear consistently after first consecration
✗ Prolonged storage disrupts energetic alignment
✓ Minimum 8 hours daily contact recommended3. Sweat Prohibition
High-sodium perspiration corrodes silicate matrix:
• Removes protective patina
• Induces micro-fractures
✓ Remove during exercise/sweaty activities4. Thermal Protection
Agate structure suffers photothermal damage:
✗ Direct sunlight >15 minutes causes crazing
✗ Dashboard exposure = irreversible fissures
✓ Store in brocade pouches when not worn5. Impact Prevention
Despite Mohs 7-8 hardness:
✗ Vulnerable to shattering upon impact
✓ Especially drill hole areas (structural weak points)
✓ Never store with metal jewelry6. Moisture Control
Hydrothermal degradation risks:
✗ Shower steam opens micro-pores
✗ Surfactants strip sacred oil coatings
✓ Annual recoating with yak butter required7. Reverent Consecration
Maintain ceremonial purity:
✗ Never enter nightclubs/casinos
✗ Avoid hospitals/funerals unless blessed
✓ Remove during intimate activities